用户工具

站点工具


侧边栏



Unity3D中文文档

script:unityengine:enumerations:audiospeakermode:audiospeakermode

AudioSpeakerMode 音频扬声器模式

Description 描述

These are speaker types defined for use with AudioSettings.speakerMode.

这些被定义的扬声器类型是用于AudioSettings.speakerMode。

Your project's default speaker mode can be set in the Audiomanager through Edit→Project Settings→Audio.

项目默认扬声器模式可以通过Audio manager设置,在菜单Edit→Project Settings→Audio

Variables 变量

RawChannel count is unaffected.
通道数量不受影响。
MonoChannel count is set to 1. The speakers are monaural.
通道数设置为1。扬声器是单声道。
StereoChannel count is set to 2. The speakers are stereo. This is the editor default.
通道数设置为2。扬声器是立体声。这是编辑器的默认。
QuadChannel count is set to 4. 4 speaker setup. This includes front left, front right, rear left, rear right.
通道数设置为4。四声道扬声器。包含前左,前右,后左,后右。
SurroundChannel count is set to 5. 5 speaker setup. This includes front left, front right, center, rear left, rear right.
通道数设置为5。五声道扬声器。包含前左,前右,中间,后左,后右。
Mode5point1Channel count is set to 6. 5.1 speaker setup. This includes front left, front right, center, rear left, rear right and a subwoofer.
通道数设置为6。5.1声道扬声器。包含前左,前右,中间,后左,后右,低音炮。
Mode7point1Channel count is set to 8. 7.1 speaker setup. This includes front left, front right, center, rear left, rear right, side left, side right and a subwoofer.
通道数设置为8。7.1声道扬声器。包含前左,前右,中间,后左,后右,侧左,侧右和一个低音炮。
PrologicChannel count is set to 2. Stereo output, but data is encoded in a way that is picked up by a Prologic/Prologic2 decoder and split into a 5.1 speaker setup.
通道数设置为2。立体声输出,但是数据被编码,通过Prologic/Prologic2解码器和分为5.1扬声器设置。
script/unityengine/enumerations/audiospeakermode/audiospeakermode.txt · 最后更改: 2016/08/22 07:52 由 hulang